Specifications

82A-10
ENGINE IMMOBILISER
Ignition switch: Removal - Refitting
82A
a Remove:
-the driver's side front airbag (see 88C, Air bag and
Pretensioners, Driver's frontal airbag: Removal
- Refitting, page 88C-22) ,
- the steering wheel (see Steering wheel: Removal
- Refitting) (MR 392, 36B, Power-assisted steer-
ing).
a Remove the bolts (8) under the lower half cowling.
a Unclip the lower and upper half cowling.
a Unclip the upper half cowling from the dashboard
gaiter (9) .
a Pull the lower half cowling out from the steering col-
umn adjustment handle.
a Remove:
- the steering column switch assembly (see 84A,
Control - Signals, Steering column switch as-
sembly: Removal - Refitting, page 84A-4) ,
- the antenna/transponder ring (see 82A, Engine
immobiliser, Transponder ring: Removal - Re-
fitting, page 82A-13) .
a Unclip the wiring harness clip.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Make a saw mark on the shear bolt.
112375
112376
117403
112436