Specifications

80A-2
BATTERY
Battery: Removal - Refitting
80A
a Remove the small part of the battery cover (3) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
1 - DISCONNECTING
a Remove the negative battery terminal (4) .
2 - REMOVAL
a Remove the nuts (5) from the protective fuse holder.
a Remove the charge terminal (6) .
a Disconnect the protective fuse holder.
a Unclip the degassing pipe (7) .
a Remove:
- the nut from the battery bracket,
- the battery bracket (8) ,
- the battery.
REFITTING
I - REFITTING PREPARATION OPERATION
a Check the battery (see Battery: Check) (80A, Bat-
tery).
a In the event of a replacement, remove the positive
battery terminal.
II - REFITTING OPERATION FOR PART
CONCERNED
1 - REPLACEMENT
a Undo the positive battery terminal.
a Push the positive battery terminal fully onto the bat-
tery terminal post.
112216
112217
127361