Specifications

81B-8
INTERIOR LIGHTING
Storage compartment light: Removal - Refitting
81B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the glovebox (see Glovebox: Removal -
Refitting) (MR 393, 57A, Interior equipment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the glove compartment light.
a Disconnect the connector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Replace the bulb with an approved C5W bulb.
a Connect the connector.
a Clip the light in place.
II - FINAL OPERATION.
a Refit the glovebox (see Glovebox: Removal - Refit-
ting) (MR 393, 57A, Interior equipment).
112442
Note:
The switch is built into the light.