Specifications

81A-10
REAR LIGHTING
3rd brake light: Removal - Refitting
B85 or C85 or S85
81A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the blanking covers (1) .
a Insert a screwdriver in the openings to move the
clips (2) .
a Apply pressure to the clips (2) to unclip the high level
brake light.
a Partially remove the raised brake light using a flat-
blade screwdriver while protecting the tailgate area
with masking tape.
a Disconnect the connector (3) .
a Unclip the window washer jet by moving the clips (4)
.
a If replacing the high level brake light, remove the
bulb (see 81A, Rear lighting, High level brake
light bulb: Removal - Refitting, page 81A-12) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
a If replacing the high level brake light, refit the bulb
(see 81A, Rear lighting, High level brake light
bulb: Removal - Refitting, page 81A-12) .
a Connect the connector.
a Clip:
- the window washer jet,
- the high level brake light.
a Refit the blanking covers.
112420
112419
112421