Specifications

81A-9
REAR LIGHTING
Rear light bulb: Removal - Refitting
81A
a Remove the bulbs from the bulb holders.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a
a Refit the bulbs on the bulb holder plate.
II - FINAL OPERATION
a Clip the bulb holder plate onto the rear light.
a Refit the rear light on the wing (see 81A, Rear light-
ing, Rear wing light: Removal - Refitting, page
81A-5) .
B85 or C85 or S85, and DOCUMENTATION
PHASE 2
139584
(1) Brake light and side light bulb
(2) Reversing light bulb
(3) Direction indicator bulb
Note:
The layout of bulbs is the same for both rear
lights.
Note:
When replacing a bulb, only use approved bulbs.