Specifications

80B-39
HEADLIGHTS
Xenon headlight high voltage unit: Removal - Refitting
80B
REFITTING
I - REFITTING PREPARATION OPERATION
a
II - REFITTING OPERATION FOR PART
CONCERNED
a Connect the connectors.
a Refit the high voltage unit with a new seal.
a Tighten to torque the high voltage unit mounting
bolts (12 Nm).
III - FINAL OPERATION
a Refit the headlight (see Xenon headlight: Removal
- Refitting) .
a Connect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-1) .
WARNING
The seal must be replaced when replacing the
high voltage unit.
Note:
Check that the connectors are locked correctly.