Specifications

80B-35
HEADLIGHTS
Headlight beam adjustment front sensor: Removal - Refitting
DISCHARGE LAMPS
80B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a lift (see Vehicle: Towing
and lifting) (MR 392, 02A, Lifting equipment).
a Remove:
- the front wheels (see Wheel: Removal - Refitting)
(MR 392, 35A, Wheels and tyres),
- the front axle subframe (see Front axle subframe:
Removal - Refitting) (MR 392, 31A, Front axle
components).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the nut (1) from the height sensor support.
a Undo the linkage bolt (2) .
a Disconnect the height sensor connector.
a Remove the height sensor.
Equipment required
Diagnostic tool
Tightening torquesm
steering box bolt 105 N.m
EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL
EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT
LEVEL EA4 or EQUIPMENT LEVEL EA5
115062