Specifications

88C-37
AIR BAG AND PRETENSIONERS
Side impact sensor: Removal - Refitting
FRONT SIDE AIRBAG or FRONT SIDE + CURTAIN AIRBAG
88C
a Position the sensor using its positioning pin (2) .
a Torque tighten the side impact sensor bolt (8 Nm).
a Connect the connector.
II - FINAL OPERATION.
a Refit the B-pillar trim (see B-pillar trim: Removal -
Refitting) (71A, Body internal trim).
a Connect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-1) .
a Unlock the airbag computer using the Diagnostic
tool (see Fault finding - Replacement of compo-
nents) (88C, Airbags and pretensioners).
108329
IMPORTANT
To a void a fault with or even triggering of pyro-
technic components (airbags or pretensioners),
check the airbag computer using the diagnostic
tool.
Note:
These sensors do not require programming with
the Diagnostic tool.