Specifications

88C-33
AIR BAG AND PRETENSIONERS
Side curtain airbag: Removal - Refitting
FRONT SIDE + CURTAIN AIRBAG
88C
a Always replace the side curtain airbag.
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the new side curtain airbag without tightening the
mountings.
a Fit all the clips, working from the rear of the vehicle
to the front.
a Fit the rear retaining pin (7) .
a Fit the front retaining pin (8) .
a Torque tighten the side curtain airbag mountings
(8 Nm) (9) .
a Connect the side curtain airbag connector (10) ,
checking that it is correctly locked.
III - FINAL OPERATION.
a Refit the headlining (see Headlining: Removal -
Refitting) (71A, Body internal trim).
a Connect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-1) .
a Unlock the airbag computer using the Diagnostic
tool (see Fault finding - Replacement of compo-
nents) (88C, Airbags and pretensioners).
(see 88C, Air bag and Pretensioners, Airbags
and pretensioners: Recycling - Destruction,
page 88C-7) .
113229
113232
113229
IMPORTANT
To avoid a fault with or even triggering of pyro-
technic components (airbags or pretensioners),
check the airbag computer using the diagnostic
tool.
IMPORTANT
To eliminate the risk of any accident, do not
reuse pyrotechnic components.
It is essential to destroy pretensioners or airbags
before scrapping a vehicle or a part only.