Specifications

80B-28
HEADLIGHTS
Front fog light: Removal - Refitting
FOG LIGHTS
80B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the front section of the front wheel arch liners (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (1) .
a Remove:
- the bolts (2) ,
- the fog light.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a To replace a bulb, use an approved bulb.
a Refit:
- the fog light,
- the fog light bolts.
a Connect the connector.
II - FINAL OPERATION
a Refit:
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the front section of the front wheel arch liners (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres).
a Adjust the fog lights using a screwdriver.
112227
DOCUMENTATION PHASE 1
113499