Specifications

88A-154
WIRING HARNESS
Rear bumper wiring: Connector access
88A
I - LOCATION OF CONNECTORS
a R 319 connecter (rear bumper/rear connection).
II - ACCESS TO CONNECTORS
a
a Switch off the ignition.
a Disconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-1) .
a Remove the light on the rear left-hand wing (see
81A, Rear lighting, Rear wing light: Removal -
Refitting, page 81A-5) .
a Disconnect the R 319 connector.
123662
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see 88A, Wiring harness, Wiring:
Precautions for the repair, page 88A-5) .
WARNING
To prevent damaging the connectors, consult the
disconnection procedure (see Connector: Dis-
connection and reconnection) (Technical Note
6015A, 88A, Wiring).
113362