Specifications

80B-25
HEADLIGHTS
Headlight bulb: Removal - Refitting
DOCUMENTATION PHASE 2
80B
a Disconnect the connector (13) from the dipped
beam headlight bulb.
a Unlock the clip (14) from the dipped beam headlight
bulb.
a Remove the dipped beam headlight bulb.
5 - Additional cornering light bulb
a Remove the sealing cover (15) .
a Unclip the additional cornering light bulb (16) .
a Remove the additional cornering light bulb.
a Disconnect the connector (17) from the additional
cornering light bulb.
REFITTING
I - REFITTING PREPARATION OPERATION
a
II - REFITTING OPERATION FOR PART
CONCERNED
1 - Direction indicator bulb
a Refit the direction indicator bulb on the bulb holder.
a Lock the bulb holder by turning it a quarter of turn
clockwise.
2 - Side light bulb
a Clip on:
- the side light bulb onto the bulb holder,
- the side light bulb holder onto the headlight.
a Refit the sealing cover.
139600
139595
139599
Note:
If the bulbs are changed, only use approved
bulbs.