Specifications

88A-127
WIRING HARNESS
Rear wiring: Connector access
88A
a R 319 connector (left-hand rear wiring/rear bumper
wiring connection).
a R 325 connector (left-hand rear wiring/second fitting
alarm wiring).
II - ACCESS TO CONNECTORS
a
a Switch off the ignition.
a Disconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-1) .
1 - Access to the R 374 connectors
a Remove the left-hand front door sill lining (see Front
door sill lining: Removal - Refitting) (MR 393,
71A, Body internal trim).
a Partially remove the front centre floor carpet,
123684
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see 88A, Wiring harness, Wiring:
Precautions for the repair, page 88A-5) .
WARNING
To prevent damaging the connectors, consult the
disconnection procedure (see Connector: Dis-
connection and reconnection) (Technical Note
6015A, 88A, Wiring).