Specifications

88A-120
WIRING HARNESS
Rear left-hand side door wiring: Removal - Refitting
B85 or K85
88A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
a Disconnect the R 13 connector for connection of
rear left-hand wiring/left-hand rear door.
a Disconnect:
- the presence detector connector (1) ,
- the opening aerial connector (2) .
a the (3) rear side door electric window winder mecha-
nism connector.
a Unclip the rear side door wiring in (4) .
a Remove the rear side door wiring.
123660
WARNING
To prevent any risk of noise, premature wear,
short circuits, etc. after the refitting operation,
mark the wiring routing and how to connect the
connectors.
VEHICLE WITH CARD
ELECTRIC REAR WINDOW
WARNING
To prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).