Specifications

88A-117
WIRING HARNESS
Rear right-hand side door wiring: Removal - Refitting
B85 or K85
88A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
a Disconnect R 243 connector which connects the
rear left-hand wiring/right-hand rear door.
a Disconnect:
- the presence detector connector (1) ,
- the opening aerial connector (2) .
a Disconnect the (3) rear side door electric window
winder mechanism connector.
a Unclip the rear side door wiring at (4) .
a Remove the rear side door wiring.
123659
WARNING
To prevent any risk of noise, premature wear,
short circuits, etc. after the refitting operation,
mark the wiring routing and how to connect the
connectors.
VEHICLE WITH CARD
ELECTRIC REAR WINDOW
WARNING
To prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).