Specifications

88A-116
WIRING HARNESS
Rear right-hand side door wiring: Removal - Refitting
B85 or K85
88A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Raise the window fully.
a Switch off the ignition.
a Disconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-1) .
a Remove:
- the rear side door trim (see Rear side door trim:
Removal - Refitting) (MR 393, 72A, Side opening
element trim),
-the rear speaker (see 86A, Radio, Rear speakers:
Removal - Refitting, page 86A-15) .
- the door sealing film (see Door sealing film: Re-
moval - Refitting) (MR 393, 65A, Opening ele-
ment sealing),
- the rear side door lock (see Rear side door lock:
Removal - Refitting) (MR 393, 51A, Side opening
element mechanisms).
IMPORTANT
Consult the safety and cleanliness advice and oper-
ation recommendations before carrying out any
repair (see 88A, Wiring harness, Wiring: Precau-
tions for the repair, page 88A-5) .
WARNING
To prevent damaging the connectors, consult the
disconnection procedure (see Connector: Dis-
connection and reconnection) (Technical Note
6015A, 88A, Wiring).