Specifications

88A-115
WIRING HARNESS
Passenger's front side door wiring: Removal - Refitting
88A
a Clip on the clip (6) .
a Connect the electric window motor connector.
a Connect the opening aerial connector.
a Connect the presence sensor connector.
a Connect the tailgate lock connector.
a Connect the door connector (12) .
a Clip on the clips (10) and (11) .
a Refit:
- the three door lock bolts,
- the side indicator,
- the door sealing film (see Door sealing film: Re-
moval - Refitting) (MR 393, 65A, Opening ele-
ment sealing),
- the side door trim (see Front side door trim: Re-
moval - Refitting) (MR 393, 72A, Side opening el-
ement trim).
a Refit the door mirror (see Door mirror: Removal -
Refitting) (MR 393, 56A, Exterior equipment),
a Refit the door mirror (see Door mirror: Removal -
Refitting) (MR 393, 56A, Exterior equipment),
a Refit the front speaker (see 86A, Radio, Front
speakers: Removal - Refitting, page 86A-14) .
a Connect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-1) .
ELECTRIC FRONT WINDOW or ONE-TOUCH
ELECTRIC FRONT WINDOW or PASSENGER
ELECTRIC ONE-TOUCH WINDOW CONTROL
VEHICLE WITH CARD
RIGHT-HAND DRIVE, and DOOR MIRRORS 02 or
DOOR MIRRORS 03
LEFT-HAND DRIVE