Specifications

88A-108
WIRING HARNESS
Driver's front side door wiring: Removal - Refitting
88A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Raise the window fully.
a Switch off the ignition.
a Disconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-1) .
a Remove the front speaker (see 86A, Radio, Front
speakers: Removal - Refitting, page 86A-14) .
a Remove the door mirror (see Door mirror: Remov-
al - Refitting) (MR 393, 56A, Exterior equipment),
a Remove the door mirror (see Door mirror: Remov-
al - Refitting) (MR 393, 56A, Exterior equipment),
a Remove:
- the side door trim (see Front side door trim: Re-
moval - Refitting) (MR 393, 72A, Side opening el-
ement trim),
-the door sealing film (see Door sealing film: Re-
moval - Refitting) (MR 393, 65A, Opening ele-
ment sealing),
- the side indicator.
a Remove the three door lock bolts (1) .
IMPORTANT
Consult the safety and cleanliness advice and oper-
ation recommendations before carrying out any
repair (see 88A, Wiring harness, Wiring: Precau-
tions for the repair, page 88A-5) .
WARNING
To avoid damaging the connectors, consult the
disconnection procedures (see Connector: Dis-
connection and reconnection) (Technical Note
6015A, 88A, Wiring).
LEFT-HAND DRIVE, and DOOR MIRRORS 02 or
DOOR MIRRORS 03
RIGHT-HAND DRIVE
111934