Specifications

88A-72
WIRING HARNESS
Engine wiring: Removal - Refitting
M4R
88A
a Disconnect:
- the air conditioning compressor connector (2) ,
- The alternator exciter connector (3) .
a Remove the nut (4) from the alternator positive ter-
minal.
a Disconnect:
- the connector (5) from the oil pressure sensor,
- the oil level sensor connector (6) ,
- the pinking sensor connector (7) ,
- the engine wiring/ignition wiring connection (9) ,
- the engine wiring/injection wiring connection (8) ,
-the connector (10) from the camshaft position sen-
sor,
- the coolant temperature sensor connector (11) ,
- the fuel vapour absorber solenoid valve connector
(12) ,
- the throttle valve connector (13) ,
- the crankshaft position sensor connector (14) ,
- the upstream oxygen sensor connector (15) ,
- the downstream oxygen sensor connector (29) .
124220