Specifications

88A-63
WIRING HARNESS
Engine wiring: Removal - Refitting
D4F, and 740 or 764
88A
a Disconnect the connector (30) from the reverse gear
switch.
a Disconnect the crankshaft position sensor connector
(31) .
a Disconnect the crankshaft position sensor connector
(32) .
a
a Unclip:
- the cylinder head wiring,
- the engine cooling fan assembly wiring,
- the sub-frame and cylinder block wiring.
a Remove:
-the engine wiring harness mounting bolt on the
clutch housing,
- the engine wiring harness.
REFITTING
I - REFITTING PREPARATION OPERATION
a If replacing with more wiring, lock the unused con-
nectors (see Connectors: Sealing and immobili-
sation) (Technical Note 6015A, 88A, Wiring).
109160
JH3
109725
JA3
117751
WARNING
To prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).