Specifications

88A-55
WIRING HARNESS
Engine wiring: Removal - Refitting
K9K
88A
a Disconnect:
- the engine cooling fan assembly connector (30) ,
- the engine cooling fan assembly resistor connector
(31) ,
- the refrigerant pressure sensor connector (32) ,
- the fuel injection computer connectors (33) ,
- the front left-hand wiring connectors (42) ,
- the Protection and Switching Unit connectors (34) ,
a Remove:
- the nut on the excitation terminal of the starter
- the nut on the positive terminal of the starter,
- all earth wiring nuts (35) from the gearbox comput-
er,
- the engine cooling fan assembly earth cable nut
(36) on the front left-hand side member,
- the gearbox earth wiring bolt (37) ,
- the 30 A fuse from the power feed fuse board,
- the fuse holders (38) ,
- the nut (39) from the power feed fuse board cable.
124226