Specifications

88A-46
WIRING HARNESS
Engine wiring: Removal - Refitting
K4J or K4M
88A
a Remove the air resonator unit (see Air resonator:
Removal - Refitting) (MR 392, 12A, Fuel mixture).
a Disconnect:
- the engine cooling fan assembly connector (20) ,
- the engine cooling fan assembly resistor connector
(21) ,
- the refrigerant pressure sensor connector (22) ,
- the fuel injection computer connectors (23) ,
- the front left-hand wiring connector (33) ,
- the Protection and Switching Unit connectors (24) ,
a Remove:
- the nut on the excitation terminal of the starter,
- the nut on the positive terminal of the starter,
- all earth cable nuts on the front left-hand side mem-
ber (25) ,
- the earth wiring bolt on the gearbox (26) ,
- the 30 A fuse from the power feed fuse board,
- the fuse holder (27) ,
- the nut (28) from the power feed fuse board cable,
- the fuel injection computer earth wiring nut (29) .
123808