Specifications

88A-45
WIRING HARNESS
Engine wiring: Removal - Refitting
K4J or K4M
88A
a Disconnect:
- the air conditioning compressor connector (2) ,
- the alternator exciter connector (3) .
a Remove the nut (4) from the alternator positive ter-
minal.
a Disconnect:
- the pinking sensor connector (5) ,
- the connector (6) from the oil pressure sensor,
- the oil level sensor connector (7) ,
- the fuel vapour absorber solenoid valve connector
(8) ,
- the camshaft dephaser solenoid valve connector
(9) ,
- the inlet air pressure sensor connector (10) ,
- the throttle valve connector (11) ,
-the connector (12) from the camshaft position sen-
sor,
- all coil connectors (13) ,
- the connector (14) from the air temperature sensor,
- the engine wiring/injection wiring connection (15) ,
- the upstream oxygen sensor connector (16) ,
- the coolant temperature sensor connector (17) ,
- ,the crankshaft position sensor connector (18) ,
- the downstream oxygen sensor connector (19) .
123809