Specifications

88A-17
WIRING HARNESS
Front left-hand wiring: Removal - Refitting
LEFT-HAND DRIVE
88A
a Remove:
- the dashboard trim piece (2) ,
- the dashboard lower trim bolt (3) .
a Remove:
- the dashboard lower trim bolts (4) ,
- the dashboard lower trim.
a Disconnect the connectors depending on equip-
ment.
a Remove:
- the bolts (5) from the Protection and Switching Unit
cover,
- the Protection and Switching Unit cover.
OPERATION FOR REMOVAL OF PART
CONCERNED
a
112380
112381
112213
WARNING
To prevent any risk of noise, premature wear,
short circuits, etc. after the refitting operation,
mark the wiring routing and how to connect the
connectors.