Specifications

88A-6
WIRING HARNESS
Front bumper wiring: Connector access
FOG LIGHTS
88A
I - LOCATION OF CONNECTORS
a R 33 connector (front end panel/front bumper con-
nection).
II - ACCESS TO CONNECTORS
a
a Switch off the ignition.
a Disconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-1) .
a Remove the front section of the front left-hand wheel
arch liner (see Front wheel arch liner: Removal -
Refitting) (MR 393, 55A, Exterior protection).
a Disconnect the R 33 connector.
123661
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see 88A, Wiring harness, Wiring:
Precautions for the repair, page 88A-5) .
WARNING
To prevent damaging the connectors, consult the
disconnection procedure (see Connector: Dis-
connection and reconnection) (Technical Note
6015A, 88A, Wiring).
111991