Specifications

87B-5
PASSENGER COMPARTMENT CONNECTION UNIT
UCH: Removal - Refitting
LEFT-HAND DRIVE
87B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a When replacing the UCH, carry out the necessary
operations using the Diagnostic tool (see Fault
finding - Replacement of components) (MR 394,
87B, Passenger compartment connection unit).
a Disconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-1) .
a Unclip the moulding at (1) .
a Remove:
- the plastic rivet (2) ,
- bolt (3) .
a Remove the door seal,
a Remove the dashboard side face (4) .
a Remove:
- the bolt (5) ,
- the dashboard lower trim (6) .
a Remove the dashboard trim (7) while unclipping the
connectors.
Equipment required
Diagnostic tool
112275
112276
112279
112278
112277