Specifications

87B-1
PASSENGER COMPARTMENT CONNECTION UNIT
UCH: Removal - Refitting
RIGHT-HAND DRIVE
87B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a If replacing the UCH, carry out the necessary pro-
gramming using the Diagnostic tool. (see Fault
finding - Replacement of components) (MR 394,
87B, Passenger compartment connection unit).
a Disconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-1) .
a Remove the storage compartment (see Glovebox:
Removal - Refitting) (MR 393, 57A, Interior equip-
ment).
a Unclip the connectors from the beam.
a Unclip the connector mountings on the beam at (2) ,
a Remove the connector mountings at (3) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip the connectors.
Equipment required
Diagnostic tool
113224
113228
VEHICLE WITH KEY
113225