Specifications

86A-11
RADIO
Radio aerial: Removal - Refitting
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Depending on the equipment level of the vehicle, re-
move the covers for the interior rear-view mirror in
order to disconnect the rain sensor connector (see
85A, Wiping - Washing, Rain and light sensor:
Removal - Refitting, page 85A-5) .
a Remove the headlining (see Headlining: Removal -
Refitting) (MR 393, 71A, Body internal trim).
a Carefully disconnect the various connectors.
a Remove the right-hand rear quarter panel trim (see
Quarter panel trim: Removal - Refitting) (MR 393,
71A, Body internal trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip the connector (1) .
a Remove the bolt (2) .
a Unclip the connector(s) (depending on the version)
from the union board (3) .
a Remove the aerial.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the aerial.
a Tighten the bolt (2) .
112590
112951
112413