Specifications

85A-18
WIPING - WASHING
Headlight washer pump: Removal - Refitting
HEADLIGHT WASHERS WITH BLADE
85A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front wheel arch liner (see Front wheel
arch liner: Removal - Refitting) (MR 393, 55A, Ex-
terior protection).
II - REMOVAL OPERATION FOR PART
CONCERNED
a Unclip the supply pipes.
a Disconnect the connector.
a Unclip the headlight washer pump.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Clip on the headlight washer pump.
a Connect the connector.
a Clip on the supply pipes.
II - FINAL OPERATION.
a Refit the front wheel arch liner (see Front wheel
arch liner: Removal - Refitting) (MR 393, 55A, Ex-
terior protection).
113502
Note:
Mark the routing of the supply pipes and wiring.