Specifications

85A-15
WIPING - WASHING
Rear screen wiper motor: Removal - Refitting
85A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove:
- the tailgate trim (see Tailgate trim: Removal - Re-
fitting) (MR 393, 73A, Non-side opening elements
trim),
-the rear screen wiper arm (see 85A, Wiping -
Washing, Rear screen wiper arm: Removal - Re-
fitting, page 85A-20) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (1) .
a
a Drill out the rivets(see MR 400, 40A, General infor-
mation).
a Remove the motor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Replace the seal (2) if necessary.
a Position the motor.
a Rivet the engine (see MR 400, 40A, General infor-
mation) (Rivets Part no. 77 03 072 362).
a Connect the motor connector.
112416
Note:
Be careful not to damage the outer skin and the
tailgate box when removing the rivets. Recover
the rivet bodies from the tailgate box section.
112425
112416