Specifications

85A-14
WIPING - WASHING
Windscreen wiper motor: Removal - Refitting
85A
a Position the motor shaft linkage (5) as shown in the
illustration above.
a Torque tighten the motor shaft linkage nut (18
Nm).
a Refit:
- the motor.
- the motor bolts (6) on the mechanism.
a Torque tighten the motor bolts (9 N.m) (6) .
a Align the motor shaft linkage as shown in the illustra-
tion above.
a Torque tighten the motor shaft linkage nut (18
Nm).
FINAL OPERATION.
a
a Refit the windscreen wiper mechanism (see 85A,
Wiping - Washing, Windscreen wiper mecha-
nism: Removal - Refitting, page 85A-10) .
113337
RIGHT-HAND DRIVE
112979
Note:
Check that the motor is correctly positioned in
the park position after tightening the nut.