Specifications

85A-5
WIPING - WASHING
Rain and light sensor: Removal - Refitting
LIGHTS + AUTOMATIC WINDSCREEN WIPER
85A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Unclip the upper casing using a flat-blade screwdriv-
er (1) .
a Remove the lower cover (2) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector.
a Unclip the two side clips (3) from the detector using
a small screwdriver.
REFITTING
I - REFITTING PREPARATION OPERATION
a Clean the windscreen using a wooden spatula (so
as not to scratch the surface).
101715
101716
101630
WARNING
Refit the rain sensor in perfectly clean conditions:
any dust or fibres could cause a fault.
Do not touch the electronic part of the sensor. Fit
the sensor to the vehicle immediately after
removing it from its packaging.