Specifications

84A-17
CONTROL - SIGNALS
Remote headlight beam adjustment control: Removal - Refitting
WITHOUT DISCHARGE LAMPS
84A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Unclip the switch plate (1) using the (Car. 1363) tool.
a Disconnect the connectors.
a Remove the plate.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the headlight remote adjustment control by
pressing on the clips (2) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the headlight remote adjustment control onto
the switch plate.
a Connect the connectors.
II - FINAL OPERATION.
a Clip the switch plate on the dashboard lower trim.
Special tooling required
Car. 1363 Set of trim removal levers.
117287
116798