Specifications

84A-16
CONTROL - SIGNALS
ESP inhibitor switch: Removal - Refitting
ELECTRONIC STABILITY PROGRAM
84A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Unclip the control plate (1) using the tool (Car.
1363).
a Disconnect the connectors.
a Remove the plate.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the ESP disabling switch by pressing on
the clips (2) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Clip the ESP disabling switch onto the switch plate.
a Connect the connectors.
II - FINAL OPERATION.
a Clip the switch plate onto the lower dashboard trim.
Special tooling required
Car. 1363 Set of trim removal levers.
117287
116798