Specifications

80A-6
BATTERY
Battery tray: Removal - Refitting
80A
a Remove:
- the battery base shield bolts (7) (M8),
- the battery base shield bolt (8) (M6).
a Unclip the harness attached to the battery base
shield.
a Remove the battery base shield.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
a Refit the battery base shield and the mounting bolts.
a Torque tighten:
- the bolts (M8) of the battery base shield (21
Nm),
- the bolt (M6) of the battery base shield (8 Nm).
a Refit the air filter box (see Air filter unit: Removal -
Refitting) (MR 392, 12A, Fuel mixture).
a Clip in place
- the battery protective tray,
- the power supply fuse board support.
a Refit the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-1) .
108262