Specifications

80A-5
BATTERY
Battery tray: Removal - Refitting
80A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-1) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip the power feed fuse board support (1) .
a Remove the power feed fuse board support (2) .
a Unclip the battery protective tray at (3) .
a Keep the fuse board support away (4) .
a Move away the battery protective shield (5) and (6) .
a Remove the battery protective shield.
a Remove the air filter box (see Air filter unit: Re-
moval - Refitting) (MR 392, 12A, Fuel mixture).
Tightening torquesm
bolts (M8) of the battery
base shield
21 Nm
bolt (M6) of the battery
base shield
8 Nm
108190
108191
112218