Specifications

83A-3
INSTRUMENT PANEL
Instrument panel: Removal - Refitting
83A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a If replacing the instrument panel, carry out the nec-
essary operations using the Diagnostic tool (see
Fault finding - Replacement of components) (MR
394, 83A, Instrument panel).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip the lower section of trim (1) .
a Unclip the upper trim .
a Remove the trim.
a Unclip instrument panel at .
a Remove the instrument panel (4) .
a Disconnect the connectors.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Connect the connectors to the instrument panel.
a Clip on:
- the upper section of the instrument panel,
- the lower section of the instrument panel,
- the instrument panel frame trim.
II - FINAL OPERATION
a If replacing the instrument panel, carry out the nec-
essary operations using the Diagnostic tool (see
Fault finding - Replacement of components) (MR
394, 83A, Instrument panel).
Equipment required
Diagnostic tool
112272
112274
112273
112271