Specifications

82B-1
HORN
Audible warning: Removal - Refitting
82B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front bumper (see Front bumper: Re-
moval - Refitting) (MR 393, 55A, Exterior protec-
tion).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the connector (1) .
a Remove:
- the bolt (2) ,
- the horn.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the horn.
a Torque tighten the horn bolt (21 Nm) (2) .
a Connect the connector (1) .
II - FINAL OPERATION.
a Refit the front bumper (see Front bumper: Remov-
al - Refitting) (MR 393, 55A, Exterior protection).
Tightening torquesm
horn bolt 21 Nm
111997