Certificate

ManualsBrandsRENATA ManualsButton CellsButton cell CR2032 Lithium CR 2032 225 mAh 3 V 1 pc(s)

ICP606168 Lithium ion (Pouch) 2800 4.4 1

ICP621333 Lithium ion 240 4.4 1

ICP622540 Lithium ion 600 4.4 3

ICP631519 Lithium ion (Pouch) 110 4.4 1

ICP631524 Lithium ion (Pouch) 160 4.4 1

ICP631530 Lithium ion (Pouch) 225 4.4 1

ICP641414 Lithium ion 95 4.4 3

ICP641620 Lithium ion 165 4.4 1

ICP651321 Lithium ion 120 4.4 3

LMR2016 (#) Lithium ion (Coin) 300 5.0 1

[a] These cells and batteries are not rechargeable. The circuit containing these cells or batteries is to contain a protective component that

prevents charging. The circuitry is to include a current-limiting component intended to protect the cell or battery, in the event the protective

component malfunctions, from a charging current in excess of the maximum abnormal charging current indicated.

[b] User - These primary cells and batteries are intended for use in applications subject to replacement by a user.

[c] Technician - These primary cells and batteries are intended for use in applications subject to replacement only by a trained service technician.

[d] These cells and batteries are rechargeable. The circuitry containing these cells or batteries is to contain protective components intended to

protect the cells or batteries from currents in excess of the maximum charging current and voltage indicated.

[e] The Max Charging Voltage noted in the column is the maximum voltage employed during the abnormal charging test of the secondary lithium

ion cell. However, the maximum recommended charging voltage for lithium ion cells is 4.2 V, unless indicated otherwise.

[f] Test Compliance - The cells comply with the tests in UL 1642 as noted:

1 - Complies with all single-cell tests

2 - Complies with all single-cell tests except the impact test

3 - Complies with all single-cell tests except the projectile test

4 - Complies with all single-cell tests except the crush test

(#) - These cells may have various insulating tube, ring or tape.

(g) - Followed by one or two digit number denoting the presence of a diode within the module or module orientation.

(h) - The power modules and cells may have a two letter suffix which denotes type of solder tab or wire lead or the mode of packaging or an

additional letter and three digit suffix which denotes type of solder tab or wire lead.

(i) - These cells may have an additional (2) two alphanumeric characters prefix which denotes the amount of cells connected electrically together,

up to three alphanumeric characters suffix which denotes type of solder tab or wire lead or the mode of packaging or (6) six/(7) seven

alphanumeric characters suffix with format xxxx-y/xxxx-yy which denotes type of solder tab or wire lead where xxxx is the type and y/yy the

revision level.

(j) - Cell model numbers may be followed by an optional slash (/) and single or multiple alphanumeric characters (i.e. letters and/or numbers),

which denote optional features such as various mounting tabs, connecting leads or plugs, packaging, etc.

(k) - The cells may have various pin, tab, insulating tube, ring and tape.

Note - The VL, ML, MT, NBL, MS and CTL cell model prefix may or may not be followed by a "-" (i.e. VL-621 is identical to VL621).

Marking: Company name, Recognized Component Mark, on the cell or smallest shipping package containing the cell.

Last Updated on 2015-11-19

Questions? Print this page Terms of Use Page Top

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured

under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up

Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide

Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-

misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with

permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the

Seite

von

BBCV2.MH14002

Lithium Batteries

Component

06.

02.

2017

http://database.ul.com/cgi

bin/XYV/template/LISEXT/1FRAME/showpage.html?name=BBCV2.MH1

...