Datasheet

ICP621333HPMT
Rechargeable Lithium Ion Polymer Battery Pack 3.8 V
Safety Circuit, NTC
Rev. ICP621333HPMT V01 11/2020
Renata SA
Tel.
[phone]
[e-mail]
CH-4452 Itingen/Switzerland
Fax.
[phone]
www.renata.com
Specifications
Dimensions
Renata Type
IEC Designation
Part Number
Contact Method:
Safety Circuit
ICP621333
ICP071335
101027
Wire AWG 30
Yes, incl. NTC
3.8 V
270 mAh
260 mAh
(0.2C cut off 3.0 V at
20°C)
Nominal Voltage
Typical Capacity
Minimum Capacity
Internal Impedance
Thickness ( t )
Lenghth ( l )
Width ( w )
Weight
Charging Characteristic
Voltage
Current Normal
Max. Charging Current
Temperature at Charging
Discharge Characteristic
Cut off Voltage
Max discharge Current
Temperature during Discharge
Cycle Life at Room Temperature
Storage Temperature
< 330 m
Ω
/ 30% SOC
Max 6.8 mm
(after 500 cycles)
Max 35 mm
(after 500 cycles)
Max 13 mm
(after 500 cycles)
~ 5.6 g
CC/CV – Constant Current / Constant Voltage
4.35 V CV
0.5 C CC – 135 mA
1.0 C CC – 270 mA
0 °C …. 45 °C
3.0 V
2.0 C – 540 mA ( for non continues discharge )
1.0 C – 270 mA ( for continues discharge )
-20 °C … 60 °C
> 80% of minimum capacity after 500 cycles ( 0.5 C
charge, 0.5 C discharge )
-20 °C … 45 °C
( 0 °C … 30 °C recommended in case of storage for
more than 3 months)
Illustration only. For detailed drawing
please contact your sales
representative.
Information and contents in this data sheet are for reference purpose only. They do not constitute any warranty or representation and are subject to
change without notice. For most current information and further details, please contact your Renata representative. For safety related information please
consult the ASDS document related to that product or product family. The Products of Renata SA are neither designed nor authorized for use in certain
areas of application of environment. For further details we refer to our webpage
www.renata.com/downloads/restriction_of_use