Datasheet

ICP401835TPRT
Rechargeable Lithium Ion Polymer Battery Pack 3.7 V
Safety Circuit, NTC
Rev. ICP401835TPRT V01 11/2022
Renata SA
Tel.
[phone]
[e-mail]
CH-4452 Itingen/Switzerland
Fax.
[phone]
www.renata.com
Specifications
Dimensions
Renata Type
IEC Designation
Part Number
Contact Method:
Safety Circuit
ICP401835
ICP051937
101026
Wire AWG 30
Yes, incl. NTC
3.7 V
215 mAh
205 mAh
(0.2C cut off 3.0 V at
20°C)
Nominal Voltage
Typical Capacity
Minimum Capacity
Internal Impedance
Thickness ( t )
Lenghth ( l )
Width ( w )
Weight
Charging Characteristic
Voltage
Current Normal
Max. Charging Current
Temperature at Charging
Discharge Characteristic
Cut off Voltage
Max discharge Current
Temperature during Discharge
Cycle Life at Room Temperature
Storage Temperature
< 320 m
Ω
/ 30% SOC
Max 4.4 mm
(after 500 cycles)
Max 37.0 mm
(after 500 cycles)
Max 18.2 mm
(after 500 cycles)
~ 5.4 g
CC/CV – Constant Current / Constant Voltage
4.2 V CV
0.5 C CC – 107.5 mA
1.0 C CC – 215 mA
0 °C …. 45 °C
3.0 V
2.0 C – 430 mA ( for non continues discharge )
1.0 C – 215 mA ( for continues discharge )
-20 °C … 60 °C
> 80% of minimum capacity after 500 cycles ( 0.5 C
charge, 0.5 C discharge )
-20 °C … 45 °C
( 0 °C … 30 °C recommended in case of storage for
more than 3 months)
Information and contents in this data sheet are for reference purpose only. They do not constitute any warranty or representation and are subject to
change without notice. For most current information and further details, please contact your Renata representative. For safety related information please
consult the ASDS document related to that product or product family. The Products of Renata SA are neither designed nor authorized for use in certain
areas of application of environment. For further details we refer to our webpage
www.renata.com/downloads/restriction_of_use
Illustration only. For detailed drawing
please contact your sales
representative.