Instructions / Assembly

REMOTE CONTROL AND FUNCTIONS
Memory Setting:
Setting M1 & M2 positions, and resetting the TV/LOUNGE/ZG positions if you are not satisfied with the factory set-
ting:
1. Press the FLAT button to flatten the bed.
2. Adjust the bed to your preferred position by pressing
head and foot up/down button.
3. Press and hold the setting button M1/M2/TV/LOUNGE/ZG, and let go after hearing the “didi” sound, which indi-
cates the setting has been successfully programmed.
4. Repeat the process for a second set.
Remote Controller Lock Setting:
1. Press the head down and the foot up buttons at the same time,
the blue backlight starts flashing to indicate that the remote
the controller has been successfully locked.
NOTE: This is to prevent children’s misoperation.
2. Repeat the process to unlock the remote controller.
Emergency Reset:
If you temporarily cannot reach the remote controller,
press the little button at the side of the control box or
the little button on the extension wire to return the bed
to the flat position.
GET TO KNOW HOW YOUR BED WORKS