Use and Care Manual

INSTALLATION GUIDE

SETTING UP YOUR ADJUSTABLE BED

When first-time use, we need to pair the

remote with the control box. Make sure there

is a power supply for both the base and

remote when you process the pairing.

Load the batteries into the remote (the battery

is not provided).

Ensure the batteries in the remote are new

and operable.

Matching code: Press the head up button, and foot up

button at the same time and don't loosen.

Then press the little button at the side of the control box.

When there is a warning tone or “didi” sound, it means

pairing is successful

Install mattress retainer bars by inserting both

ends of it into the hole on the platform and lay the

bars down with curved sides facing up.

Setup is now complete! Test all functions on remote.