Manualshelf

Use and Care Manual

ManualsBrandsRenanim ManualsAdjustable BedsAdjustable Gray Split-King Bed Frame USB, Under Bed Light, Memory Foam, App Control, Platform Bed 12 in. Mattress
12345678910
INSTALLATION GUIDE
SETTING UP YOUR ADJUSTABLE BED
1
Lay the carton flat on the floor and carefully cut it open. Lift the carton so that the open side faces down and
slide it up and off the bed. Place the bed upside-down flat on the floor.
Remove the binding straps and packing materials, making sure not to puncture the box with any sharp ob-
jects. Cut the zip ties, take out all the part boxes and the mattress rail, and check that you have all the nec-
essary parts according to the parts list.
2
Leg assembly: Push the screw through the triangular
brace from underneath.
NOTE: Screw in the leg and tighten.
3
Connect the 01-connector of the controller to the
01-plug in the power supply.
Connect the 8-wire plug of the power cable to the other
jack on the switch’s power supply.
4
Carefully flip the base over. Important: Two people are required to move the bed
base. Do not drag across the floor.
Plug the power cord into a power source.
A surge protector is recommended. (Not included)
5
Quickly test remote functions to verify proper setup before placing the mattress on the base. Return the
base to a flat position before placing the mattress on top.