User Manual

M ATHF ACTS IN A FLASH PRACTICE ON RESPONDERS
Taking a Test on a Level
20
4. Practice should be highlighted. Press Select or Enter.
5. For each problem, press the letter button for the answer that you want to
choose; then, press Select or Enter.
If you chose the correct answer, a square will appear around the answer,
and then the next problem will appear.
If you choose the wrong answer, an X will appear over the answer you
chose; then, a dotted square will appear around the correct answer. When
the square disappears, choose the correct answer and press Select or
Enter.
If the time is almost up for a problem, a clock will flash in the black bar at
the top of the screen; choose an answer as soon as possible and press
Select or Enter. If time runs out before you answer the problem, the
screen will notify you, and the timeout will be treated like an incorrect
answer; press Enter to continue.
6. After you answer the last question, the screen will show your results,
including the number of problems you answered correctly and the total
number of problems in the practice session. It will also show the problems
you got wrong and their correct answers. Use the arrow buttons to scroll
up and down through the results. When you are done, press Select or
Enter.
Taking a Test on a Level
Students follow these steps to take a test for a MathFacts in a Flash level.
Tests always include 40 problems.
1. From the main menu, use the arrow buttons to highlight MathFacts in a
Flash. Then, press Select or Enter.
If the student has
tested on this level
and the test is still in
the history, the practice will
include any problems the
student missed plus questions
deemed difficult for the level.
You will see the results for the
last practice or test.
2KnowResourceGuide.fm Page 20 Tuesday, June 15, 2010 11:40 AM