User's Manual

R ENAISSANCE RECEIVER SETUP AND KEY TASKS
Naming the Receiver and Changing the PIN
7
1. At your computer, start the Renaissance Wireless Server Utility:
• Windows: Click StartProgramsRenaissance Wireless
ServerRenaissance Wireless Server Utility.
• Macintosh: Open the Applications folder, then the Renaissance
Wireless Server folder. Double-click Renaissance Wireless Server
Utility.
2. Type 1234 and click OK to log in. (1234 is the default Administrator PIN
here and for Responders.) If necessary, click Start.
3. Click the Server Settings tab.
4. Change the Network Name
A from “Renaissance Receiver” to a name
your Responder users will recognize. Make sure the name is different
from the name of other Receivers you own.
5. Click Update Network Settings
B.
6. Click OK. Tell your Responder users the Receiver name.
7. If you want to change the Administrator PIN used for this utility and for
setting changes on Responders, click Set Administrator PIN
C. Enter a
new PIN (4–8 characters with letters and/or numbers). Click OK.
8. Close the utility when you have finished. It will continue running in the
background.
The Renaissance
Wireless Server
Utility is installed with
AccelTest and the 2Know!
Toolbar.
Renaissance Place
Settings button. You
will also have a
Renaissance Place Settings
button if you have NEO
Manager installed. This button
is for setting the Renaissance
Place URL if you are using the
NEO 2 Accelerated Reader or
MathFacts in a Flash
SmartApplets. For details, see
the NEO 2 Quick Guide.
A
B
C