User's Manual
Table Of Contents
- Free Online Training
- Support by Phone and Web
- What You Received
- Renaissance Receiver Setup and Key Tasks
- Responder Settings and Key Tasks
- Software-the 2Know! Toolbar
- Install the Toolbar
- Start the 2Know! Toolbar and Get Ready for the Session
- Start the Session
- Ask the Questions
- Use the Graph
- Ask Pulse Questions
- Use the Teacher Responder Feature
- Choose a Different Theme and/or Change the Size of the Toolbar
- Get Software Updates
- View 2Know! Toolbar Instructions while Using the Toolbar
- View the Toolbar Version and Other Information
- Tips for Using the 2Know! Toolbar in a Classroom
- Software-AccelTest Key Tasks
- Software-Accelerated Math RP
- Frequently Asked Questions
- Limited Warranty
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by Renaissance Learning could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The Renaissance Responder and Renaissance Receiver have been tested to and comply with the following standards:
FCC Rules and Regulations/CFR 47
Receivers and all other Unintentional Radiators
Part 15, subpart B 15.107a & 15.109a
FCC Rules and Regulations/Intentional Radiators
Operational in the 912–928 MHz, 2400–2483.5 MHz, 5725–5875 MHz
And 24.0–24.25 GHz Bands
Part 15, Subpart C, Section 15.249
Low Power License-Exempt Communications Devices
(All Frequency Bands)
Radio Standards Specification
RSS-210, Issue 5
November 2001
Industry Canada “Radio Standards Specification”
RSS-210, Issue 5, November 2001
Low Power License-Exempt Radio Communication Devices
(All Frequency Bands) Receivers
R&TTE Directive 1999/5/EC (Transmitter and Receiver)
EN 300 400-2 (emissions and immunity)
EN 301 489-1-17 (emissions and immunity)