User's Manual

R ESPONDER SETTINGS AND KEY TASKS
Responder Key Tasks
12
Joining a Session
AccelTest or the Toolbar must be open.
1. Highlight Join Session and press Select.
2. If the Renaissance Responder asks to stay connected to the chosen
Renaissance Receiver, press Yes or No and Select. If you chose No, or if
the Responder simply lists the Receivers, highlight the correct
Renaissance Receiver and press Select.
Assigning Owners to Renaissance Responders
Note: MathFacts in a Flash Responders cannot have assigned owners.
1. Open the AccelTest software and verify that students are enrolled in
classes.
2. Turn on the Renaissance Responder and join the session.
3. Highlight Settings and press Select.
4. Highlight Assign Owner and press Select.
5. Enter the student’s ID number (found next to the student’s name in the
Gradebook) and press Enter.
Changing a Student PIN for Owned Responders
1. Enter the student PIN (default is 1212) and press Enter.
2. Highlight Settings and press Select.
3. Highlight Change PIN and press Select.
4. Enter a new PIN and press Enter.
Displaying a Forgotten PIN (Owned Responders)
1. Press ? and join the session.
2. Enter the administrator PIN (default is 1234) and press Enter.
3. After the Renaissance Responder states the device is unlocked and
reveals the PIN, press any key.
Resetting the Owner of an Owned Responder
1. Highlight Settings and press Select.
2. Highlight Reset Owner and press Select.
3. Enter the administrator PIN (default is 1234) and press Enter.