User's Manual

S MARTA PPLETS
Choosing SmartApplet Settings
81
. . . . .
NEO
User Manual
As you add SmartApplets to the Install List, check the Memory column C
to make sure there is enough memory available on the NEOs to install the
SmartApplets you want. The darker color shows the space used on the
NEO, and the lighter color shows what is needed by the SmartApplet(s)
you want to install. If you don’t have enough memory to install the
SmartApplets you want, you could delete some SmartApplets from NEOs
as described on page 82.
6. Click the Send List tab and verify that the SmartApplets you want to
install appear in the list.
7. If you have a SmartOption Mobile Lab and you want to send the
SmartApplets to some, but not all, of the NEOs, click Select Devices.
Check the box for each NEO that you want to send the SmartApplets to,
and click OK. (To send to all connected NEOs, skip this step.)
8. Click Send. If you have set a send list password (see page 197), you
must enter the password and click OK.
Choosing SmartApplet Settings
Many SmartApplets have their own settings, and the NEO itself has system
settings. You can change the settings in the NEO Control Panel (see page 174)
or in NEO Manager (see page 187).