User's Manual
76
NEO
User Manual
S MARTA PPLETS
Managing the SmartApplets on Your NEO
. . . . .
An additional SmartApplet, Co:Writer, is available from Don Johnston, Inc. If
you purchase this SmartApplet and it was not already installed when you
received your NEOs, be sure to follow the installation instructions provided
by Don Johnston, Inc.
Managing the SmartApplets on Your NEO
The easiest way to manage SmartApplets is to use NEO Manager. In NEO
Manager, you can do the following:
• Change the startup SmartApplet (the one that starts automatically when
you start a NEO). See the instructions below.
• Disable SmartApplets on your NEOs (see page 78).
• Install new or updated SmartApplets on the connected NEOs (see page 79).
• Change SmartApplet settings on NEOs (see page 81).
• Remove SmartApplets from the connected NEOs (see page 82).
• View SmartApplet information (see page 83).
• Add SmartApplets to the list available in NEO Manager (see page 84).
You can also perform some of these tasks on the NEO itself. For example,
from the SmartApplets menu, you can change the SmartApplet that starts
when you start the NEO, and you can disable SmartApplets (see page 78).
Changing the Startup SmartApplet
The startup SmartApplet is the one that starts automatically when you turn
on a NEO. AlphaWord Plus is the startup SmartApplet when you first receive
your NEOs. You can change the startup SmartApplet on the NEO itself (see
the steps below) or using the NEO Manager software (see page 77).
Changing the Startup SmartApplet on the NEO Itself
1. Press applets.
2. Use the arrow keys to move the cursor next to the SmartApplet that you
want to start when you turn on your NEO.
If you don’t set a
startup SmartApplet,
when you turn on your
NEO, it goes to the
SmartApplets list, with the
cursor next to the SmartApplet
you were working in the last
time you turned the NEO off.